User's Tags

Bettino Fidanza 's Entries

15 blogs
  • 28 Apr 2019
    Coal is the most commonly used energy source in South Africa. It is produced by ancient plant life that have decomposed to form peat and the pressure applied to the peat over millions of years forms coal. The coal suppliers in South Africa mine the coal and sell it in bulk quantities. (Information credit: http://www.omnienergy.co.za/)   Types of coal:   1. Anthracite coal: The last stage of coal formation, Anthracite coal is very hard. With 80% to 90% carbon content, this coal hardly produces any smoke or is clean burning. Anthracite coal is supplied in bulk by the coal suppliers in South Africa.   2. Bituminous coal: With high carbon content of 70% to 75% and less water and oxygen content, this coal is divided into two types such as coking and non-coking coal. Both types are divided into gas coal and steam coal.   3. Lignite coal: The next stage of peat coal, lignite is rich in volatile constituents. The colour changes from yellow to dark brown at this stage. This coke burns with a lot of flame and smoke. It has the lowest carbon content of 45% and the highest powder content.   Uses of Coal:   1. Domestic fuel: Coal is largely used as a domestic fuel for heating the room in many countries. It is easily available, less expensive, and you can burn it easily.   2. Generate electricity: Coal is the biggest source of electricity throughout the world. Coal is burned which burns water this heat then turns water into steam, which spins the turbines to produce power.   3. Source of steam energy: Coal is the most popular source of steam energy. Train engines and ship engines have depended on coal for a long-time to run.   4. Steel industry and ammonia: Coal also takes part in the production of steel indirectly. In the steel production units, the manufacturers bake coal in furnaces and coal coke is formed. Then this coal coke is used to make steel by smelting iron ore into iron. Moreover, ammonia gas that is used to produce ammonia salts, fertilisers and nitric acid, is recovered from these coke ovens.   5. Liquefaction and gasification: Coal can be turned into liquid and gas that are called synthetic fuel and synthetic gas respectively. The liquid and gas can be converted into other products like methanol, urea, pure hydrogen etc.   6. By-products of coal: Several by-products can be produced from coal, such as saccharin, benzene, phenol, ammonium sulphate, tab, anthracene, pyridine, naphthalene, paraxylene toluene etc. are produced from coal.   Coal is widely used in many industries. The coal suppliers in South Africa deliver bulk coal daily, all over the country.
    276 Posted by Bettino Fidanza
  • Coal is the most commonly used energy source in South Africa. It is produced by ancient plant life that have decomposed to form peat and the pressure applied to the peat over millions of years forms coal. The coal suppliers in South Africa mine the coal and sell it in bulk quantities. (Information credit: http://www.omnienergy.co.za/)   Types of coal:   1. Anthracite coal: The last stage of coal formation, Anthracite coal is very hard. With 80% to 90% carbon content, this coal hardly produces any smoke or is clean burning. Anthracite coal is supplied in bulk by the coal suppliers in South Africa.   2. Bituminous coal: With high carbon content of 70% to 75% and less water and oxygen content, this coal is divided into two types such as coking and non-coking coal. Both types are divided into gas coal and steam coal.   3. Lignite coal: The next stage of peat coal, lignite is rich in volatile constituents. The colour changes from yellow to dark brown at this stage. This coke burns with a lot of flame and smoke. It has the lowest carbon content of 45% and the highest powder content.   Uses of Coal:   1. Domestic fuel: Coal is largely used as a domestic fuel for heating the room in many countries. It is easily available, less expensive, and you can burn it easily.   2. Generate electricity: Coal is the biggest source of electricity throughout the world. Coal is burned which burns water this heat then turns water into steam, which spins the turbines to produce power.   3. Source of steam energy: Coal is the most popular source of steam energy. Train engines and ship engines have depended on coal for a long-time to run.   4. Steel industry and ammonia: Coal also takes part in the production of steel indirectly. In the steel production units, the manufacturers bake coal in furnaces and coal coke is formed. Then this coal coke is used to make steel by smelting iron ore into iron. Moreover, ammonia gas that is used to produce ammonia salts, fertilisers and nitric acid, is recovered from these coke ovens.   5. Liquefaction and gasification: Coal can be turned into liquid and gas that are called synthetic fuel and synthetic gas respectively. The liquid and gas can be converted into other products like methanol, urea, pure hydrogen etc.   6. By-products of coal: Several by-products can be produced from coal, such as saccharin, benzene, phenol, ammonium sulphate, tab, anthracene, pyridine, naphthalene, paraxylene toluene etc. are produced from coal.   Coal is widely used in many industries. The coal suppliers in South Africa deliver bulk coal daily, all over the country.
    Apr 28, 2019 276
  • 24 Apr 2019
    For some people, home isn’t just four walls and a ceiling. Home is a place where you spend your most cherished moments with your family. Most people relish the opportunity to improve, redesign and renovate their homes. Renovations are far more cost-efficient than moving. Renovation projects are motivated by the need of adding more space, or giving a complete makeover to a specific section of the house. Moreover, renovation adds to the value of a house so that the owners obtain high profit when it’s up for sale.   Bathrooms are just as important as any other rooms in a house. Bathroom renovations in Cape Town are trending these days because people are spending a substantial amount of their time, effort and money into crafting a luxurious experience for themselves at home. Renovating kitchens, bedrooms and bathrooms is common these days but it’s not at all an easy job. Absorbing all sorts of ideas can be a bit too much and it might obscure anyone’s judgement. To ease the process of getting one’s customised renovated bathroom, the following set of advice may come in handy for any individual: (Information credit: http://essentialkitchens.co.za/bathrooms/)   1. Setting Up Budget: It has been discussed earlier that instead of moving, renovation is a far better alternative. After making up one’s mind what’s necessary is to finalise a sufficient budget that supports your renovation project. People can either do it themselves or take help from experts who handle such projects.   2. Finding a Guide: One person cannot possess the assets to handle everything on their own. When you plan on renovating your bathroom, you can’t waste your budget by selecting anything just because it feels or looks good. To ensure the best expenditure of your budget, you must gain knowledge about the renovation and customisation of bathrooms. Always start with a good plan, infuse your ideas with the expertise of a professional and get a quote from them regarding bathroom cabinetry and cupboard installations.   3. Choose the Best: The industry of interior renovations is full of options and you’ll find many self-acclaimed companies which guarantee an easy-going process for your bathroom renovation. But not all are cooperative enough to provide you with excellent workmanship as well as materials. Therefore, it’s necessary to keep your wits about you while getting services from a company and run a full background check.   4. Prefer Eco-friendly Solutions: During renovating your bathroom, many new materials are installed in place of the old ones. At that time, it is important to find out whether they are eco-friendly or not. Many green modifications are affordable. Reduction of eco-footprint is one of the most important aspects that should be kept in mind.   There’s a saying that home is the place to which you can always return to. Houses and its different portions such as rooms, garden, kitchen and bathrooms leave an unforgettable impression on our minds. Hence people, who love their homes, make time to redesign and decorate them often.
    176 Posted by Bettino Fidanza
  • For some people, home isn’t just four walls and a ceiling. Home is a place where you spend your most cherished moments with your family. Most people relish the opportunity to improve, redesign and renovate their homes. Renovations are far more cost-efficient than moving. Renovation projects are motivated by the need of adding more space, or giving a complete makeover to a specific section of the house. Moreover, renovation adds to the value of a house so that the owners obtain high profit when it’s up for sale.   Bathrooms are just as important as any other rooms in a house. Bathroom renovations in Cape Town are trending these days because people are spending a substantial amount of their time, effort and money into crafting a luxurious experience for themselves at home. Renovating kitchens, bedrooms and bathrooms is common these days but it’s not at all an easy job. Absorbing all sorts of ideas can be a bit too much and it might obscure anyone’s judgement. To ease the process of getting one’s customised renovated bathroom, the following set of advice may come in handy for any individual: (Information credit: http://essentialkitchens.co.za/bathrooms/)   1. Setting Up Budget: It has been discussed earlier that instead of moving, renovation is a far better alternative. After making up one’s mind what’s necessary is to finalise a sufficient budget that supports your renovation project. People can either do it themselves or take help from experts who handle such projects.   2. Finding a Guide: One person cannot possess the assets to handle everything on their own. When you plan on renovating your bathroom, you can’t waste your budget by selecting anything just because it feels or looks good. To ensure the best expenditure of your budget, you must gain knowledge about the renovation and customisation of bathrooms. Always start with a good plan, infuse your ideas with the expertise of a professional and get a quote from them regarding bathroom cabinetry and cupboard installations.   3. Choose the Best: The industry of interior renovations is full of options and you’ll find many self-acclaimed companies which guarantee an easy-going process for your bathroom renovation. But not all are cooperative enough to provide you with excellent workmanship as well as materials. Therefore, it’s necessary to keep your wits about you while getting services from a company and run a full background check.   4. Prefer Eco-friendly Solutions: During renovating your bathroom, many new materials are installed in place of the old ones. At that time, it is important to find out whether they are eco-friendly or not. Many green modifications are affordable. Reduction of eco-footprint is one of the most important aspects that should be kept in mind.   There’s a saying that home is the place to which you can always return to. Houses and its different portions such as rooms, garden, kitchen and bathrooms leave an unforgettable impression on our minds. Hence people, who love their homes, make time to redesign and decorate them often.
    Apr 24, 2019 176
  • 19 Apr 2019
    One of the most natural questions faced by students and professionals is ‘what next’? Education is completed – now what to do? What is the right career path? Career counselling can help in this situation!   Experienced professionals too are often in the same kind of dilemma, when after spending several years in a particular job or industry they start to feel that stagnation is setting in. They start to feel that their life objectives are not being met. Taking care of all such requirements, career counselling in Cape Town is one service, which is in great demand. The importance of effective career counselling cannot be denied because it helps you in selecting the right career path. (Information credit: https://globaltalentmine.com/career-advice-guidance-and-coaching/)   Parental influence is often quite strong in many families. This can be a negative as well as positive in the decision making on which individual career path to take. Though parents can offer great support, sometimes it is seen that they tend to be an obstacle, when students desire something else. At times it is noticed that students suppress their actual wishes for their family, which influences their career goals in their later years.   Career counselling experts help students and professionals in many ways. This is of great importance for all those who are confused and unhappy with their career goals.   1. Helps In Identification of Weaknesses and Strengths: Career counselling experts will help you through a number of tests which include aptitude tests, personality tests and tests which help in the evaluation of your weaknesses and strength. Thus, in this way they can help in selecting the right career path. Such tests will help you improve in different areas, which are weak and need attention. Your career counsellor will help in taking steps so that your weaknesses can be addressed.   2. Set Goals For Life: The expert helps in offering the right guidance by setting short and long-term goals. It helps in creating a good action plan, based on the career goals of the individual. This includes the right advice in every stage. When experts help in setting goals, then it’s easy to create a career path. This helps in measuring your progress at different stages. When a student or a professional works with a guide, it is easier to anticipate challenges in advance and tackle problems as and when they arise.   3. Exploring Options: Your career counselling expert can help in exploring different options. The expert spends time with you and helps in assessing your interests and different options, which helps in exploring different opportunities. The expert helps in offering an insight into the different options so that you are able to select the right path.   Know more about different career opportunities – Once your career path is selected, the expert helps in finding the different opportunities available. You can follow-up as per their suggestions and recommendations. Professionals can prepare for different interviews.  You will also get great follow-up advice.   Even if you feel you have met the objectives of your career or there is nothing amiss, you can still seek professional guidance.
    174 Posted by Bettino Fidanza
  • One of the most natural questions faced by students and professionals is ‘what next’? Education is completed – now what to do? What is the right career path? Career counselling can help in this situation!   Experienced professionals too are often in the same kind of dilemma, when after spending several years in a particular job or industry they start to feel that stagnation is setting in. They start to feel that their life objectives are not being met. Taking care of all such requirements, career counselling in Cape Town is one service, which is in great demand. The importance of effective career counselling cannot be denied because it helps you in selecting the right career path. (Information credit: https://globaltalentmine.com/career-advice-guidance-and-coaching/)   Parental influence is often quite strong in many families. This can be a negative as well as positive in the decision making on which individual career path to take. Though parents can offer great support, sometimes it is seen that they tend to be an obstacle, when students desire something else. At times it is noticed that students suppress their actual wishes for their family, which influences their career goals in their later years.   Career counselling experts help students and professionals in many ways. This is of great importance for all those who are confused and unhappy with their career goals.   1. Helps In Identification of Weaknesses and Strengths: Career counselling experts will help you through a number of tests which include aptitude tests, personality tests and tests which help in the evaluation of your weaknesses and strength. Thus, in this way they can help in selecting the right career path. Such tests will help you improve in different areas, which are weak and need attention. Your career counsellor will help in taking steps so that your weaknesses can be addressed.   2. Set Goals For Life: The expert helps in offering the right guidance by setting short and long-term goals. It helps in creating a good action plan, based on the career goals of the individual. This includes the right advice in every stage. When experts help in setting goals, then it’s easy to create a career path. This helps in measuring your progress at different stages. When a student or a professional works with a guide, it is easier to anticipate challenges in advance and tackle problems as and when they arise.   3. Exploring Options: Your career counselling expert can help in exploring different options. The expert spends time with you and helps in assessing your interests and different options, which helps in exploring different opportunities. The expert helps in offering an insight into the different options so that you are able to select the right path.   Know more about different career opportunities – Once your career path is selected, the expert helps in finding the different opportunities available. You can follow-up as per their suggestions and recommendations. Professionals can prepare for different interviews.  You will also get great follow-up advice.   Even if you feel you have met the objectives of your career or there is nothing amiss, you can still seek professional guidance.
    Apr 19, 2019 174
  • 18 Apr 2019
    Stainless Steel Laser cutting has become a mainstay in the manufacturing industry for quite some time now. It almost accounts for 70% of all laser applications in these industries. Modern laser cutting units have successfully made an impact on the market. Much of it can be attributed to their great sets of features which are much improved from traditional cutting technology. (Information Credit: http://www.plasmacut.co.za/services)   Working with a stainless steel laser cutting service provider can give any company a boost in production and quality. Below are just some features that help it to stand out.   1. Versatility: Stainless Steel laser cutting has the ability to accurately cut through steel of varied thickness, shapes and sizes. A typical laser cutter can cut through a variety of materials, from 0.5mm to 25mm, without any problems.   2. Repeated Precision: Modern laser cutters provide users with an easy and accurate way of reproducing their plans according to specifications. Apart from this, it provides precise repeatability during every use, making it appropriate for use in mass production.   3. Improved Edge Quality: Compared to conventional methods, laser cutting can achieve very clean edges. This is due to the non-contact nature of the process, where no wearing of the materials is caused by the tools. There also is no direct mechanical force applied on the material, which prevents any kind of material distortions or contaminations.   4. Maintenance: Industrial laser cutting units require inexpensive replacement parts and very little maintenance compared to other units. Parts like nozzles and lenses are readily available in the market and do not cost a fortune.   5. Lower lead time: Industrial laser cutting machines for stainless steel applications can execute a number of different tasks. Attention to detail is possible when using laser cutting technology, as it has the ability to recreate 3D shapes and complex designs.   Applications in Various Industries: Since the introduction of laser cutting in the early 1960s, it has been employed both in large-scale operations as well as small in-house tasks. Below are a few examples.   i) Jewellery: The jewellery manufacturing industry requires intricate and complex details to be reproduced accurately.  High precision laser cutting has allowed jewellers to develop various styles catering to a wide variety of customers.   ii) Laser-Cut Business Cards: The popular trend of preparing metallic business cards is only possible through the widespread use of laser cutting technology.  This allows designers to create metallic business cards according to specific cutting criteria. The final product not only looks impressive but can withstand years of heavy usage without breakage.   iii) Aerospace Design: Laser cutting in the aerospace industry has been used since the late 1970s for the purpose of producing complex aerospace components. Precision is of paramount importance to this industry and laser cutting delivers the accuracy that this industry requires.   Stainless steel laser cutting is efficient enough to handle a myriad of manufacturing processes and operational tasks. They provide services to the transport, construction, and mining industries, as well as businesses involved in the creation of unusually shaped products for specific reasons.
    201 Posted by Bettino Fidanza
  • Stainless Steel Laser cutting has become a mainstay in the manufacturing industry for quite some time now. It almost accounts for 70% of all laser applications in these industries. Modern laser cutting units have successfully made an impact on the market. Much of it can be attributed to their great sets of features which are much improved from traditional cutting technology. (Information Credit: http://www.plasmacut.co.za/services)   Working with a stainless steel laser cutting service provider can give any company a boost in production and quality. Below are just some features that help it to stand out.   1. Versatility: Stainless Steel laser cutting has the ability to accurately cut through steel of varied thickness, shapes and sizes. A typical laser cutter can cut through a variety of materials, from 0.5mm to 25mm, without any problems.   2. Repeated Precision: Modern laser cutters provide users with an easy and accurate way of reproducing their plans according to specifications. Apart from this, it provides precise repeatability during every use, making it appropriate for use in mass production.   3. Improved Edge Quality: Compared to conventional methods, laser cutting can achieve very clean edges. This is due to the non-contact nature of the process, where no wearing of the materials is caused by the tools. There also is no direct mechanical force applied on the material, which prevents any kind of material distortions or contaminations.   4. Maintenance: Industrial laser cutting units require inexpensive replacement parts and very little maintenance compared to other units. Parts like nozzles and lenses are readily available in the market and do not cost a fortune.   5. Lower lead time: Industrial laser cutting machines for stainless steel applications can execute a number of different tasks. Attention to detail is possible when using laser cutting technology, as it has the ability to recreate 3D shapes and complex designs.   Applications in Various Industries: Since the introduction of laser cutting in the early 1960s, it has been employed both in large-scale operations as well as small in-house tasks. Below are a few examples.   i) Jewellery: The jewellery manufacturing industry requires intricate and complex details to be reproduced accurately.  High precision laser cutting has allowed jewellers to develop various styles catering to a wide variety of customers.   ii) Laser-Cut Business Cards: The popular trend of preparing metallic business cards is only possible through the widespread use of laser cutting technology.  This allows designers to create metallic business cards according to specific cutting criteria. The final product not only looks impressive but can withstand years of heavy usage without breakage.   iii) Aerospace Design: Laser cutting in the aerospace industry has been used since the late 1970s for the purpose of producing complex aerospace components. Precision is of paramount importance to this industry and laser cutting delivers the accuracy that this industry requires.   Stainless steel laser cutting is efficient enough to handle a myriad of manufacturing processes and operational tasks. They provide services to the transport, construction, and mining industries, as well as businesses involved in the creation of unusually shaped products for specific reasons.
    Apr 18, 2019 201
  • 15 Mar 2019
    Credit recovery and debt management are two crucial elements for maintaining a sound financial position of any business. A focused debt management strategy is essential to save time, reduce costs and maximise the utilisation of resources. Therefore, many companies and businesses choose to outsource their debt management services. (Information Credit – https://www.accountability.co.za/group/quality_services.php)   In order to create an effective strategy, here are some features that you must include in your debt management strategy: 1. Location of Debtors – Debt often arises due to the inability to locate a debtor. To fix this, you should see that your debt management service provider drafts a system to locate such debtors. You should strive to keep the latest contact information for all your debtors. This will allow you to locate and contact the debtors.   2. Prioritise Collection – Through scoring and analysis tools, monitor the portfolio of all your clients closely. Based on this, you will be able to identify the accounts with the highest potential for payment. Simply prioritise your collection efforts towards recovering your receivables from these debtors.   3. Unpaid Debt Recovery – An effective strategy is always aimed at recovering all accounts, even the ones that were closed. Monitoring the debtors constantly will help you in recognising the debtors who have become solvent. When a once insolvent debtor becomes capable of paying, you can again open the account and collect the unpaid amount.   4. Legal Compliance – Data protection, credit collection and debt management are highly regulated areas. Thus, it is imperative that your debt management services provider complies with debt collection and data regulations. The agency should be skilled and have knowledge of all the necessary rules and regulations, legal notices and procedures.   5. Building Better Customer Relationships – When you keep your focus on your customers and build strong relationships, it will cultivate trust and understanding.   6. Employ Specialised Skills – It is a common misconception that debt management is simply a part of customer operations. However, customer debt management is a complex process that requires skills, training and support.   Skills Needed for Efficient Debt Management Engaging customers at all stages of debt recovery is a task that requires some special skills. While the customer operations team can handle sales and resolving customer queries, they might not be able to guide customers in resolving late payment issues. To handle debt, one must have excellent conversation skills to keep the consumers engaged and negotiate debt. One should also be able to anticipate the changes in the needs and behaviour of the customer. This will help in keeping up with their latest contacts and informed about the financial position of the customer. Employing such skills is necessary to effectively manage debt and curb losses.
    211 Posted by Bettino Fidanza
  • Credit recovery and debt management are two crucial elements for maintaining a sound financial position of any business. A focused debt management strategy is essential to save time, reduce costs and maximise the utilisation of resources. Therefore, many companies and businesses choose to outsource their debt management services. (Information Credit – https://www.accountability.co.za/group/quality_services.php)   In order to create an effective strategy, here are some features that you must include in your debt management strategy: 1. Location of Debtors – Debt often arises due to the inability to locate a debtor. To fix this, you should see that your debt management service provider drafts a system to locate such debtors. You should strive to keep the latest contact information for all your debtors. This will allow you to locate and contact the debtors.   2. Prioritise Collection – Through scoring and analysis tools, monitor the portfolio of all your clients closely. Based on this, you will be able to identify the accounts with the highest potential for payment. Simply prioritise your collection efforts towards recovering your receivables from these debtors.   3. Unpaid Debt Recovery – An effective strategy is always aimed at recovering all accounts, even the ones that were closed. Monitoring the debtors constantly will help you in recognising the debtors who have become solvent. When a once insolvent debtor becomes capable of paying, you can again open the account and collect the unpaid amount.   4. Legal Compliance – Data protection, credit collection and debt management are highly regulated areas. Thus, it is imperative that your debt management services provider complies with debt collection and data regulations. The agency should be skilled and have knowledge of all the necessary rules and regulations, legal notices and procedures.   5. Building Better Customer Relationships – When you keep your focus on your customers and build strong relationships, it will cultivate trust and understanding.   6. Employ Specialised Skills – It is a common misconception that debt management is simply a part of customer operations. However, customer debt management is a complex process that requires skills, training and support.   Skills Needed for Efficient Debt Management Engaging customers at all stages of debt recovery is a task that requires some special skills. While the customer operations team can handle sales and resolving customer queries, they might not be able to guide customers in resolving late payment issues. To handle debt, one must have excellent conversation skills to keep the consumers engaged and negotiate debt. One should also be able to anticipate the changes in the needs and behaviour of the customer. This will help in keeping up with their latest contacts and informed about the financial position of the customer. Employing such skills is necessary to effectively manage debt and curb losses.
    Mar 15, 2019 211
  • 15 Mar 2019
    All of the trades will need this feature for the right settlement. If you work with the risk management, the proper concentration can be on the trading performance. From that, the traders will start getting good with the proper market analysis. There will be some other thing needed for that. We are talking about proper profit targets. The traders will have to make the right choice on their trades. It can make your trading approaches legit or fake for some good executions. And when combining your risk to profit margin ration, there will be another thing to consider. In fact, there will be two separate things. They are known as the stop-losses and take-profits for the trades. If the traders will be able to make the right choice for the risk and profit management, there will be good control of the trades. They will all be properly closed with the position sizes. In this article, we are going to talk more on the right performance with the trades.   You will have to minimize the risk per trades Proper control of the risk per trade will be done with good planning of the investment. You will have to learn to trade with the least amount of lots. Because it can impact on the risk to profit margin. From there, the traders will not have the right ability to make the right choice on the position sizing. Even worse, stop-losses and take-profits will be influenced in a bad way. That is not so good for the right trading setups. At a novice trading level, the traders might start with a small account. This way, the trading mind will have the most minimal setup for the trades. And this is very good for a decent performance in everything. Even the margin trading must not be inside of your trading plans. Getting comfortable with the right management of the risks per trade, there will have to be improvements in everything. The risk, as well as the orders, will also get a boost.   Avoid news trading News trading is one of the easiest ways to catch large market movements. However, new traders in the exchange traded funds community should never try to trade the high impact news. Even the professional UK traders often stay in the sideline to protect their investment. Being a new trader, you might not understand how this market works, but if you use the Saxo demo trading account, you can easily develop your trading skills. If possible, develop a strong habit of reading as it will always keep you updated with the latest market news.   There will have to be good profit targets Alongside the right risk management, traders will have to think about the right profit targets. It will be done for the right performance in the profit targets. From there, you will need to get going with the market analysis. The traders will be able to find some good signals when there is a reference to work with. Using the trends and key swings of the price charts will be learned in very short time. Without the right kind of target to profits, the traders will not be able to size the trades. That is very important for all of the trades. This way, the right management of the trades will happen. The traders will also be able to make some good trades possible with a decent timeframe.   Proper protections must be given to the trades The last thing you will have to work with is the proper stop-losses and take-profits. The traders will be able to save their trades with the help of those two things. They will help with the proper closing of the trades. There will not be too much volatility in your trades to affect the returns.
    204 Posted by Bettino Fidanza
  • All of the trades will need this feature for the right settlement. If you work with the risk management, the proper concentration can be on the trading performance. From that, the traders will start getting good with the proper market analysis. There will be some other thing needed for that. We are talking about proper profit targets. The traders will have to make the right choice on their trades. It can make your trading approaches legit or fake for some good executions. And when combining your risk to profit margin ration, there will be another thing to consider. In fact, there will be two separate things. They are known as the stop-losses and take-profits for the trades. If the traders will be able to make the right choice for the risk and profit management, there will be good control of the trades. They will all be properly closed with the position sizes. In this article, we are going to talk more on the right performance with the trades.   You will have to minimize the risk per trades Proper control of the risk per trade will be done with good planning of the investment. You will have to learn to trade with the least amount of lots. Because it can impact on the risk to profit margin. From there, the traders will not have the right ability to make the right choice on the position sizing. Even worse, stop-losses and take-profits will be influenced in a bad way. That is not so good for the right trading setups. At a novice trading level, the traders might start with a small account. This way, the trading mind will have the most minimal setup for the trades. And this is very good for a decent performance in everything. Even the margin trading must not be inside of your trading plans. Getting comfortable with the right management of the risks per trade, there will have to be improvements in everything. The risk, as well as the orders, will also get a boost.   Avoid news trading News trading is one of the easiest ways to catch large market movements. However, new traders in the exchange traded funds community should never try to trade the high impact news. Even the professional UK traders often stay in the sideline to protect their investment. Being a new trader, you might not understand how this market works, but if you use the Saxo demo trading account, you can easily develop your trading skills. If possible, develop a strong habit of reading as it will always keep you updated with the latest market news.   There will have to be good profit targets Alongside the right risk management, traders will have to think about the right profit targets. It will be done for the right performance in the profit targets. From there, you will need to get going with the market analysis. The traders will be able to find some good signals when there is a reference to work with. Using the trends and key swings of the price charts will be learned in very short time. Without the right kind of target to profits, the traders will not be able to size the trades. That is very important for all of the trades. This way, the right management of the trades will happen. The traders will also be able to make some good trades possible with a decent timeframe.   Proper protections must be given to the trades The last thing you will have to work with is the proper stop-losses and take-profits. The traders will be able to save their trades with the help of those two things. They will help with the proper closing of the trades. There will not be too much volatility in your trades to affect the returns.
    Mar 15, 2019 204